Skip to content
XigQR

QR Code Guides

QR Code Printing Guide: Best Size, Resolution and Formats

How big should a printed QR code be, what resolution does it need, and should you send PNG, SVG or PDF? Practical numbers, a distance table and a pre-print checklist.

By XigQR Team · Published

The most expensive QR code mistakes are the ones you discover after the print run: a code too small to scan from where people stand, a blurry edge, a margin trimmed by the printer. This guide covers the decisions that matter for print: size, resolution, file format, color and material, and ends with a checklist you can run before you approve a proof.

Start with the scanning distance

Size is determined by how far away the phone will be. A widely used rule of thumb is that the code's width should be about one tenth of the scanning distance. It is a starting point, not a guarantee, because denser codes (long links) need more room per module.

Typical scanning distanceExampleMinimum code width (rule of thumb)
20–30 cmBusiness card, product label, receipt2–3 cm
50 cmTable card, flyer, packaging4–5 cm
1 mCounter sign, shelf, small poster10 cm
2–3 mWall poster, window sticker20–30 cm
10 mBillboard, large banner1 m

Whatever the table says, avoid going below about 2 cm square, and go bigger if the content is long, the surface is textured or the light is poor. Remember that the code includes its white margin, so measure the dark pattern, not the whole sticker.

Keep the quiet zone

The blank margin around the code is called the quiet zone, and the QR specification asks for at least four modules (the small squares) of it on every side. Scanners use it to find the code. XigQR exports include it. Do not crop it, do not let a border, photo or text run into it, and ask your printer not to trim into it. If the code sits on a coloured or photographic background, print a clean white (or very light) box behind it that includes the margin.

Resolution: pixels, DPI and why vector is easier

For a raster file (PNG), the pixels you need depend on the print size and the printer's resolution:

pixels needed = size in inches × DPI

Printed widthAt 300 DPIAt 600 DPI
2.5 cm (about 1 in)300 px600 px
5 cm (about 2 in)590 px1,180 px
10 cm (about 4 in)1,180 px2,360 px
20 cm (about 8 in)2,360 px4,720 px

XigQR watermark-free PNG exports go up to 4,096 px, which is about 34 cm at 300 DPI. Beyond that, or any time you are unsure, use a vector format.

QR codes are made of sharp-edged squares, so blurry scaling hurts them more than photographs. PNG exports from XigQR are built with a whole number of pixels per module, so the edges stay crisp, which means the exact pixel size can differ slightly from the number you request. Do not stretch or resample a PNG in a layout program; place it at a size that is a clean fraction of its native size, or use a vector file.

Which file format to send

FormatUse it forNotes
SVGLayout and design tools; signs; die-cut labelsVector, any size, sharp at every scale. First choice for print work.
PDFPrinters that want a PDF; quick placement in documentsVector page sized to the code. Scale in your layout.
PNGWord processors, slides, web, small printsRaster: export at a size that meets the DPI table.

On XigQR, free downloads are PNG with a small frame and footer, up to 1024 px. A one-time payment for a QR code unlocks watermark-free PNG, SVG and PDF for it, in any size, with unlimited re-downloads (from $1; see pricing). Use the free PNG for drafts and layout proofs, and the clean file for production.

Color: contrast first, brand second

  • Dark modules on a light background is the most reliable and works on every scanner.
  • Do not invert. Light modules on a dark background fail on some devices.
  • Test brand colors. A mid-tone orange on white can scan fine on a phone screen and fail in dim print lighting. Pick a clearly dark foreground.
  • Process printing (CMYK): for the dark modules use a single dark ink rather than a mix of four colors, so slight misregistration does not blur the edges. Ask your printer how they want it specified.
  • Do not use spot varnish or foil that changes reflectivity across the code, which can confuse cameras.

Logos and decoration

A small logo in the center is possible thanks to error correction, but every bit of decoration reduces the margin for print variation. If you add one, keep it small and test the printed proof. See How to Create a QR Code With Your Logo.

Materials and surfaces

SurfaceWatch out forAdvice
Glossy paper, film or laminateGlare from lights and sunlightPrefer matte finishes
Kraft or coloured stockLow contrastPrint a white box behind the code
Curved or wrinkled surfaces (bottles, bags)DistortionPlace on the flattest area; make it larger
Fabric and rough texturesBroken edgesMake the code larger and keep the content short
Outdoor signsFading, dirt, waterUse durable inks and materials; check the code periodically
Screens and slidesMoiré, small size at the backShow it large, on a plain background, for long enough

Shorter content makes a better print

The longer the link or text, the more modules the code needs, and the smaller each one is at a given size. If a code struggles to scan, shorten the destination: point the code at a short page on your own site, or at a short address that redirects to the long one. This is the single most effective fix for print reliability.

Placement for common items

  • Flyers and brochures: place the code near the call to action, on a flat area, away from folds and trim edges. Say what scanning does.
  • Posters: size for the viewing distance, at a comfortable height, in a place where people can pause.
  • Packaging and labels: avoid seams and creases. See QR codes on product packaging.
  • Business cards: at least 2 cm square, preferably on the back, and test with the final paper. See QR codes for business cards.
  • Events and signage: make a test sheet and scan from where attendees will stand. See QR codes for events.

Our best-practices guide covers calls to action and design in more depth.

Pre-print checklist

  1. Scan the exact file you are sending, on at least two phones.
  2. Confirm the destination works on mobile data and loads quickly.
  3. Check the printed size against the distance table.
  4. Check that the quiet zone is intact and nothing overlaps it.
  5. Check dark-on-light contrast, and that no varnish or foil crosses the code.
  6. Use SVG or PDF if available, or a PNG at the right DPI.
  7. Print a proof on the real material, and scan the proof, not a screenshot.
  8. Add a short label next to the code.

Frequently asked questions

What is the smallest QR code I can print?

For close-range scanning, aim for at least 2 cm square. Smaller is possible with short content and good printing, but it is fragile. Always test.

What DPI should I use?

300 DPI is the usual minimum for print; use the table above to compute pixels. With vector files you do not need to think about DPI.

PNG, SVG or PDF?

SVG or PDF for print. PNG for documents and screens.

Can the printer recolor or resize my QR code?

Ask them not to. Resizing is fine if proportions are kept and the quiet zone is preserved; recoloring can break the contrast.

Why does my printed code scan on screen but not on paper?

Usually the size is too small for the distance, the contrast dropped in printing, the margin was cropped, or the content is too long. Check each in turn.

Get a print-ready file

Create the code in the generator, check it scans, and unlock the vector files when you are ready to print. More on formats and sizes is on the print solutions page.

Creating and previewing QR codes is free. Free downloads are PNG files with a small XigQR frame and footer. A one-time payment (from $1 per QR code, with credit packs for more) unlocks watermark-free PNG, SVG and PDF exports of that QR code. No subscription.

Create your QR code

Preview it free in seconds. Download with XigQR branding, or unlock watermark-free files with a one-time payment.

Related tools and pages

More articles